F8 FILTER SUITABLE FOR HRV SYSTEMS

Read and follow the maintenance instructions in the Operating Guidelines of your unit.

Step 1: Ensure fan is switched off

Step 2: Remove duct tape and remove the ducting section from the fan unit

Step 3: Remove old box filter

Step 4: Insert new filter, the arrow on the side follows the airflow

Step 5: Tape the lip of the filter to the ducting section to prevent air bypass

Step 6: Re-tape ducting section onto fan unit

Replace filter every 24 months.

Filter replacements suitable for all HRV systems including Janus, Arizona, Phoenix, Rango and Next Generation HRV systems.

Switch off at the control panel

Press down button for 8 seconds

It will beep after about 3 seconds, but keep it pushed for the full 8 seconds

02 is displayed in the roof

20 is displayed in the house

Push the on/off button and a 1 or a 5 will be displayed

Push the on/off button again & again to cycle through the numbers displayed until you come back to the 1 or 5 being displayed again

Push the Function button to confirm

Switch off at the control panel

Hold the “down” button for 8 seconds

It will beep after about 3 seconds, but keep it pressed for the full 8 seconds

02 is displayed in the roof

Press the “up” button to increase 02 to 22 (not holding it down, short pushes)

Below the 22 you will see a 0

Press the power button to increase the 0 to 9

Push the Function button to save settings

STEP 1. ENSURE FAN IS SWITCHED OFF

STEP 2. UNSCREW THE SCREWS ON SIDE

STEP 3. UNLIP THE CLIPS

STEP 4. REMOVE OLD BOX FILTER

STEP 5. INSERT NEW FILTER WITH ARROW ON SIDE FOLLOWING AIRFLOW. MAKE SURE FILTER IS PUSHED ALL THE WAY IN

STEP 6. PUT ALL BACK TOGETHER AND RESET FILTER  ON PANEL

    replace filter every 24 months

STEP 1. GO INTO THE MENU

STEP 2. GO TO MENU PAGE 3

STEP 3. GO TO ABOUT YOUR HRV

STEP 4. TOUCH THE COLOURED HRV LOGO 5 TIMES UNTIL SCREEN BEEPS

STEP 5. GO TO INSTALLER PAGE 2 THE ITEM YOU ARE LOOKING FOR IS FILTER RESET.

STEP 6. SELECT RESET

STEP 7. PRESS HOME TO SAVE.

If for any reason the item is does not fit,is damaged or we have supplied an incorrect item we will offer a replacement at no extra charge or full refund including the shipping costs, at our discretion.We may ask that the filter be returned to us for examination or resale but will pay the return shipping costs.If a customer has ordered an incorrect item or reconsidered their purchase we will refund the cost of the filter less any shipping cost upon the receipt of the item in a saleable condition