This HRV compatible ventilation filter offers H10 level filtration with HEPA efficiency. This filter captures pollens, dust and allergens from the air. HEPA filters can capture at least 99.97% of particles with a diameter greater than or equal to 0.3m. HEPA H10 pass more than 15% of 0.1 micron particles per litre of air. The HEPA filter is made from fibreglass or filter paper and form mini folds to increase the filter surface. HEPA filters prevent the spread of bacteria and viruses through the air and, therefore, are very important to prevent infection. HEPA filtration systems for medical purposes usually incorporate high-energy ultraviolet light to eliminate any live bacteria and viruses trapped by the physical filter. Some of the best rated HEPA units have an efficiency of 99.995% which ensures a high level of protection against diseases that are transmitted through the air.The filter cassette is held in a frame of silicon impregnated cardboard to facilitate maintenance and replacement. If you need aluminuim foil tape you can buy some from the bottom of the shop page. Comes instructions on how to change the filter and reset the light. If you need aluminium foil tape can purchase at bottom of product page DISCOUNT CODE FOR 5% OFF WHEN YOU BUY 3 OR MORE FILTERS USE 3 filters DISCOUNT CODE FOR 10% OFF WHEN YOU BUY 6 OR MORE FILTERS USE 6 filters
H10 HEPA FILTER SUITABLE FOR HRV SYSTEMS
Read and follow the maintenance instructions in the Operating Guidelines of your unit.
Step 1: Ensure fan is switched off
Step 2: Remove duct tape and remove the ducting section from the fan unit
Step 3: Remove old box filter
Step 4: Insert new filter, the arrow on the side follows the airflow
Step 5: Tape the lip of the filter to the ducting section to prevent air bypass
Step 6: Re-tape ducting section onto fan unit
Replace filter every 24 months.
Filter replacements suitable for all HRV systems including Janus, Arizona, Phoenix, Rango and Next Generation HRV systems.